6bone to 6to4

[Kurt D. Zeilenga]

At 10:01 PM 1/22/01 +0100, Kristoff Bonne wrote:
>Greetings,
>
>Besides 6bone (BGP) connectivity, I am also playing with the 6to4
>encapsulation.
>I my router has IP-address 195.13.17.26, I use the block of IP-addresses 
>2002:C30D:111A/48. (which should be correct).
>
>I also set up a static route at my router, that routes traffic to
>2002::/16 to the 6-to-4 tunnel. (The rest used the routing-info that is
>received via BGP4+).
>
>(Also note, that I also have a block of IP-addresses from the
>6bone: 3FFE:80B0:1001::/48, received from belnet.
>
>This seams to work for hosts that have a IPv6-address in my
>6bone-range (for all traffic), but a hosts that only has a 6to4-type
>address can only reach other hosts that have a 6to4 address.

Do they have a route to the 6BONE?

>Is there something that needs to be done so that nodes on the 6bone can
>also contact me?
>Can I announce my 6to4-subnet in BGP to the 6bone BGP-clouth or is there
>somewhere a 'universal' 6bone -> 6to4 gateway.
>
>Cheerio! Kr. Bonne.
>-- 
>KB905-RIPE                                       Belgacom  IP networking
>(c=be,a=rtt,p=belgacomgroup,s=Bonne,g=Kristoff)  Internet, IP and IP/VPN
>kristoff.bonne@skypro.be                         Faxbox :  +32 2 2435122