IPv6 over IPv4 tunnels in IOS

[Joel Barrett]

You can check out the Cisco IPv6 website at
	http://www.cisco.com/go/ipv6

While I found no specific configurations, there is quite a bit of good
information available there, plus the IOS software for the routers. The
current IOS implementation is based on IOS 12.1 and includes support for the
following functionality:

* RIPv6
* BGP4+ for IPv6
* IPv6 Static Routes
* EUI-64 Addressing
* Traffic Filtering
* IPv4 <---> IPv6 Address Translation
* Automatic and Static Tunnels
* Neighbour Discovery
* IPv6 over Ethernet, FDDI, Cisco HDLC and ATM PVCs.
* Dual Stack support for Telnet, DNS and TFTP.
* ICMPv6 and Ping
* Traceroute and Debug Command

I also found a decent IPv6 config example at
	http://www.ipv6.surfnet.nl/sheets/100.html


Joel Barrett


--
Joel W. Barrett, Systems Engineer
Service Provider Channel
CISCO SYSTEMS, INC.
500 Northridge Rd., Suite 800
Atlanta, GA 30350
Email: joel.barrett@cisco.com
Email pager: jbarrett3@bellsouthips.com
Cell : (678)640-0634 (primary phone)
Vmail: (678)352-2753
Pager: (800)365-4578
Web  : http://www.cisco.com
"Empowering the Internet Generation"


-----Original Message-----
From: owner-6bone@ISI.EDU [mailto:owner-6bone@ISI.EDU]On Behalf Of
Foster, Kristopher
Sent: Sunday, May 28, 2000 9:44 PM
To: '6bone@isi.edu'
Subject: IPv6 over IPv4 tunnels in IOS


I have been searching for tunneling examples on the Cisco platform.  So far
my attempts at configuring our tunnel have not been successful, any help
would be appreciated.

Sincerely,
Kristopher K. Foster
Technologist
C1 Communications
http://www.c1communications.com
office: 905/814-3320
cell: 416/728-2763