AW: Test adresses - Part II

Florent Parent Florent.Parent@viagenie.qc.ca
Thu, 24 Aug 2000 09:44:18 -0400


I've forwarded your email to support@freenet6.net  Someone will help you out.

Florent.

At 05:30 2000-08-24 -0700, nigel@forever-networks.com wrote:
>First of all, I wan't to thank everyone who responded to my inquiry !
>
>I  tried Freenet. My tunnel connection appears to be up. I can't ping the 
>IPv6 addresses provided by Freenet
>either....
>
>interface Tunnel0
>  no ip address
>  no ip directed-broadcast
>  ip mtu 1480
>  ipv6 enable
>  ipv6 address 3FFE:B00:C18:1FFF::1D1/127
>  ipv6 rip T0 enable
>  tunnel source Ethernet0
>  tunnel destination 206.123.31.102
>  tunnel mode ipv6ip
>!
>interface Ethernet0
>  ip address 141.155.254.5 255.255.255.0
>  no ip directed-broadcast
>  ipv6 enable
>  ipv6 rip T0 enable
>
>Ethernet0 is up, line protocol is up
>   IPv6 is enabled, link-local address is FE80::200:CFF:FE3E:651C
>   No global unicast address is configured
>   Joined group address(es):
>     FF02::1
>     FF02::2
>     FF02::1:FF3E:651C
>     FF02::9
>   MTU is 1500 bytes
>   ICMP error messages limited to one every 500 milliseconds
>   ND advertised reachable time is 0 milliseconds
>   ND advertised retransmit interval is 0 milliseconds
>   ND router advertisements are sent every 200 seconds
>   ND router advertisements live for 1800 seconds
>   Hosts use stateless autoconfig for addresses.
>Tunnel0 is up, line protocol is up
>   IPv6 is enabled, link-local address is FE80::C3E:651C:8
>   Global unicast address(es):
>     3FFE:B00:C18:1FFF::1D1, subnet is 3FFE:B00:C18:1FFF::1D0/127
>   Joined group address(es):
>     FF02::1
>     FF02::2
>     FF02::1:FF1C:8
>     FF02::1:FF00:1D1
>     FF02::9
>   MTU is 1480 bytes
>   ICMP error messages limited to one every 500 milliseconds
>   ND advertised reachable time is 0 milliseconds
>   ND advertised retransmit interval is 0 milliseconds
>   ND router advertisements are sent every 200 seconds
>   ND router advertisements live for 1800 seconds
>   Hosts use stateless autoconfig for addresses.
>
>
>On Wed, 23 August 2000, "Stojakovic, Branislav" wrote:
>
> >
> > Have you tried www.freenet6.net?
> > They provide configured tunnel and IPv6 address to any single host with 
> dual
> > stack, Solaris is supported..
> >
> > Regards
> > Brani
> >
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von:    nigel@forever-networks.com [SMTP:nigel@forever-networks.com]
> > > Gesendet am:    Mittwoch, 23. August 2000 19:08
> > > An:    6bone@ISI.EDU
> > > Betreff:    Test adresses ?
> > >
> > > I have a tunnel connection to 6bone. (I think I do)
> > > Where can I find a list of addresses to test connectivity.
> > >
> > > Nigel Clarke
> > > Network Systems Engineer
> > > Forever Networks
> > > nigel@forever-networks.com
>
>Nigel Clarke
>Network Systems Engineer
>Forever Networks
>nigel@forever-networks.com