[6bone] IPv6 and FreeBSD

[Raul Rivero]

On Tue, 17 Sep 2002, Nick Kraal wrote:

> I hope that this is not OTT on this mailing-list.
>
> I am trying to implement a simple IPv6 gateway on FreeBSD. This box has
> three interfaces xl0,ep1 and gif0. xl0 is connected to a v4 network and runs
> fine. gif0 is a IPv4 tunneled interface to the existing IPv6 router. The ep1
> interface is to a switch where I am trying to construct a pure IPv6 network
> 2001:FFFF:B405:2::/64. IPv6 connectivity from the box seems to be working
> fine but I am a bit stuck on the RA portion running on interface ep1. Can
> this work or must I install Zebra. Any ideas/hints/pointers will be greatly
> appreciated.
>

It's in spanish but you could read:

  (ipv4) http://imasd.elmundo.es/imasd/ipv6/cfg/router-freebsd.html
  (ipv6) http://imasd.ipv6.elmundo.es/imasd/ipv6/cfg/router-freebsd.html

Regards.

> Thanks in advance.
>
> -nick/
>
> ...from the IPv6 router:
> ipv6 route 2001:FFFF:B405::/48 Tunnel 5
>
> ...from /etc/rc.conf
> # ---IPv6 router config---
> ipv6_enable="YES"
> ipv6_static_routes="default"
> ipv6_route_default="default -interface gif0"
> ipv6_gateway_enable="YES"
> ipv6_network_interfaces="xl0 ep1"
> ipv6_prefix_xl0="2001:FFFF:B405:1 prefixlen 64"
> ipv6_prefix_ep1="2001:FFFF:B405:2 prefixlen 64"
> gif_interfaces="gif0"
> prefixcmd="YES"
> rtadvd_enable="YES"
> rtadvd_interfaces="ep1"
> gifconfig_gif0="200.100.200.110 200.100.220.12"
> ifconifg_xl0_alias0="2001:FFFF:B405:1::1 prefixlen 64"
> ifconifg_ep1_alias0="2001:FFFF:B405:2::1 prefixlen 64"
>
>
> _______________________________________________
> 6bone mailing list
> 6bone@mailman.isi.edu
> http://mailman.isi.edu/mailman/listinfo/6bone
>

--
Raul Rivero            | Mundinteractivos - El Mundo |
Director Tecnico       | Pradillo, 42                |
raul.rivero@elmundo.es | 28002 - Madrid (SPAIN, EU)  |
http://www.elmundo.es/ | Tel: (+34) 915856018        |