[6bone] Cisco bug ?

Hans Goes hans.goes@wcom.com
Sat, 9 Nov 2002 14:44:47 +0000 (GMT)


Hi ,


Thanks to all who replied. We will take a closer look in the used IOS
versions we use on the ipv6 network.

I just forgot to activate the transit peer group indeed so it's working
now :)

This box is doing ipv6 only btw.

Hans

On Sat, 9 Nov 2002, Jan Czmok wrote:

> Hans Goes (hgoes@eu.uu.net) wrote:
> > Hi,
> >
> > We're using a Cisco 7507 with a RSP4+ (256meg).
> >
> > 6B1.AMS7#ping 2001:820:0:1:1::2
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 2001:820:0:1:1::2, timeout is 2 seconds:
> > !!!!!
> > Success rate is 100 percent (5/5), round-trip min/avg/max = 40/64/100 ms
> > 6B1.AMS7#conf t
> > Enter configuration commands, one per line.  End with CNTL/Z.
> > 6B1.AMS7(config)#router bgp 1890
> > 6B1.AMS7(config-router)#neighbor 2001:820:0:1:1::2 remote-as 16186
> > 6B1.AMS7(config-router)#address-family ipv6
> > 6B1.AMS7(config-router-af)#neighbor 2001:820:0:1:1::2 activate
> > 6B1.AMS7(config-router-af)#neighbor 2001:820:0:1:1::2 peer-group transit
> > % Activate the peer-group for the address family first
> >
> > 6B1.AMS7(config-router-af)#neighbor 2001:820:0:1:1::2 remote-as 16186
> > 6B1.AMS7(config-router-af)#neighbor 2001:820:0:1:1::2 peer-group transit
> > % Activate the peer-group for the address family first
> >
> > 6B1.AMS7(config-router-af)#neighbor 2001:820:0:1:1::2 activate
> > 6B1.AMS7(config-router-af)#neighbor 2001:820:0:1:1::2 remote-as 16186
> > 6B1.AMS7(config-router-af)#neighbor 2001:820:0:1:1::2 peer-group transit
> > % Activate the peer-group for the address family first
> >
> > Any idea ? I've had this problem a couple of times but still the same
> > problem. Sometimes a router reload helps... But that's not the way we want
> > it :)
> >
> > System image file is "slot0:rsp-pv-mz.122-0.5.T.bin"
> >
>
> it's quite easy:
>
> router bgp 1890ß
> address-family ipv6
> neighbor transit activate
>
> then then the above...
>
> --jan
>
>
> --
>      Jan Ahrent Czmok - Senior Network Engineer - Access Networks
> Global Access Telecommunications, Inc. - Stephanstr. 3 - 60313 Frankfurt
> voice: +49 69 299896-35 - fax: +49 69 299896-66 - email: czmok@gatel.de
>
>
>


Hans Goes

WorldCom
EMEA Network Operations
Joan Muyskenweg 24
1096 CJ Amsterdam

Tel: +31 20 7112428 (Fax: 2455)
V-Net: 711 2428
http://www.wcom.com/nl/